I know, I use Orion for 8 years now but I never needed, so never found out
- how to use multiple outputs of the same instrument in a propper way.
e.g. just loaded KONTAK Player -> Steinway Piano which has 8 stripes in the mixer. Normally, I reduce it to 1. But now I want to use 2 instances. How do I route the 2nd stripe and where do I enter the notes for that one. I only have 1 Steinway generator on screen.
Pls help. How to do ...Moderators: Christophe, Mark
12 posts
• Page 1 of 1
Re: Pls help. How to do ... ..."two instances " ...you mean two Kontakt ? ....you have the choice to insert one between three ( a 16out or a 8out or Kontakt )...
Re: Pls help. How to do ...no, one generator, two or more stripes in the mixer. Multi Out
Re: Pls help. How to do ...I don't know, but I'm guessing MIDI channels? isn't there a channel select on the lower left of the piano roll?
(I'm not at Orion right now) I don't mean to be unhelpful.. I just had a guess and figured it was better than nothing before somebody that knows comes along.
Re: Pls help. How to do ...
Tried the MIDI-Chn select in the piano roll. the instrument does show that the keys were hit but no sound coming out.
Re: Pls help. How to do ...Are you sure the Steinway is routed to output 2 within Kontakt ?
Re: Pls help. How to do ...
Well, ich choose Midi-Ch 2 in the piano roll and insert some notes. But nothing happens. Do I have to set something else in KONTAKT? It's an older version from 2003 which came with Garritan Personal Orchestra 4. UPDATE: Just choose 2 instead of Omni on the KONTAKT menu on top screen and now it plays the notes from Midi-Ch 2. But still using the first stripe on ORION's Mixing Desk. I want Mid-Ch1 = Stripe 1, Mid-Ch2 = Stripe 2 etc. How does that work?
Re: Pls help. How to do ... ...maybe a limitation of Kontakt player ? ....
Re: Pls help. How to do ...
not sure. I think I just need to know what to do. Can't fiqure it out. Maybe I should read the manual.
Re: Pls help. How to do ...Not sure about Kontakt player but in Kontakt,
click on the output button (next to keyb ) and available channels will be shown. You then may need to add a channel by selecting 'Create own master channel' it in the second/third and so on instruments own control screen by clicking the v next to output:under the instruments name. On the new channel click the 1I2 button and in the new dialogue box select the mixer channel you want in Orion Oh! and you need to do all that midi channel stuff in Orions piano roll, by the sounds of it you've already sorted that part out. Hope that helps
Re: Pls help. How to do ...
Thanks a lot! Will give it a try.
12 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 388 guests |
© 2017 Synapse Audio Software. All Rights Reserved. |