Sir,
i face this problem recent two days. I, mainly work Electro House. problem is when i mixed, my sound is up down. like sound is worked as compressor. also output sound not clear. i use PSP XENON limiter. have no sound card.
Problem. crazy output SoundModerators: Christophe, Mark
5 posts
• Page 1 of 1
Re: Problem. crazy output Sound
From the Xenon manual: The Integrated Leveler PSP Xenon also includes an integrated Leveler which compensates for volume changes in the program that occur over longer periods of time. To understand how the Leveler functions, you need to be aware that the average level and loudness of a given audio signal cannot be increased infinitely for a given release time. There is a threshold, dependent on the specific audio material you are limiting, above which increasing the limiter input gain will not result in greater perceived loudness. Instead, the limiter will start to pump heavily whenever it recovers from moments of deep gain reduction. In this situation, there is nothing gained by increasing the input level above that threshold level. However, sometimes program material consists of dynamically louder and quieter parts. If the limiting parameters were set for the quiet passages, when the louder parts occur the artifacts mentioned previously will become very apparent. PSP Xenon Leveler applies a relatively constant, slow-changing gain reduction to loud passages before the limiting is applied. This is particularly useful for loudness maximization applications, in which the goal is to make each part of the song sound as loud as possible. For traditional limiting of short peaks without clipping, the leveler can be turned off (leveler knob all the way up) thereby preserving the original macrodynamics of the program. So, lower the Input gain.
If your mix doesn't sound clear, go back to the mix. Find what's causing the problem, go each instrument, one at the time, then in combination, and as a whole arrangement, and fix what you think needs fixing.
Surely, you MUST have a sound card, even if it's an integrated one, otherwise you couldn't hear anything. SoundCloud ::: Facebook
Re: Problem. crazy output Soundthanks sir,
Today i am use Brick wall limiter. set it's Release knob to '0'. Now my sound is clear.
Re: Problem. crazy output SoundI will also try that in case I get this same problem.
Re: Problem. crazy output SoundTry VeeMax....it's my secret weapon and it's free as well. From the developer of Skinman and Knobman........
http://www.g200kg.com/en/software/veemax.html
5 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 358 guests |
© 2017 Synapse Audio Software. All Rights Reserved. |