OSC 2 always on.Moderators: Christophe, Mark
21 posts
• Page 1 of 2 • 1, 2
OSC 2 always on.How do I get OSC 2 to be turned off? What if I only want to use 1? Its always on, and its doubling my amplitude, when I don't want it too. I can't have a higher note in OSC 1 without it effecting OSC 2. The OSC-Mix is fully set to OSC 1.
Re: OSC 2 always on.Another issue is, I can't use the Square wave without having Pulse-Width above 0.
Re: OSC 2 always on.Do you mean for DUNE?
Re: OSC 2 always on.Yes, Sorry. I can't believe I didn't mention that lol.
Re: OSC 2 always on.
I don't understand what you mean. If Osc mix is set fully to Osc1 then there will be no Osc2 output.
Re: OSC 2 always on.
A pulse width of 0 corresponds to DC offset (as does pulse width of 100, but with opposite polarity). Think of the extremes of a pulse wave as on/off states. PW=0 is always off, PW=100 is always on. To get a pulse wave you need it to switch periodically from off to on and back again etc. For a square wave, pulse width needs to be set to 50, i.e. on and off for half a cycle each.
Re: OSC 2 always on.Thanks. So what about the first question?
Re: OSC 2 always on.
I replied above already!
Re: OSC 2 always on.
if the OSC Mix is fully left to OSC1, no sound is coming from OSC2 Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: OSC 2 always on.Thats not the case for me. Sometimes OSC-MIX is fully targeted onto OSC 1 and OSC 2 still has output. This is even like this when starting a blank INIT patch. Its definitely a bug.
Re: OSC 2 always on.not happening here...
what host what version (v1.3?) what version 32/64bit Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: OSC 2 always on.If it was a bug, I am pretty sure it would have been picked up in almost a year of beta-testing, unless it has been introduced recently. It is far more likely you are doing something wrong. Check the Mod Matrix and FM settings.
Dell G7 (Hexa-Core i7)|Cubase Pro 10||Analog Keys|Ultranova|MicroMonsta|Uno|Skulpt|Craft Synth 2.0|
novakill.com
Re: OSC 2 always on.Just tried it on a blank patch. Seems to be working fine here.
SoundCloud ::: Facebook
Re: OSC 2 always on.Pulse Width 0/100 is exactly what it is meant to be, a zero or full duty cycle, which is inaudible. This is according to the technical definition of the duty cycle. Some implement it differently, it's a matter of taste. It may be useful for gating or other effects though; also Dune prefers reliable numbers to simplify patch design (e.g. if a 100% duty cylce is not 100%, then what is 50%...?).
Admin - Synapse Audio Software
Twitter - www.twitter.com/SynapseAudio Facebook - www.facebook.com/SynapseAudioOfficial
Re: OSC 2 always on.As I mentioned. It does this on INIT patch. It doesn't always do it either. Sometimes it does. There is a blank matrix when this is happening... FM is 0 too.
21 posts
• Page 1 of 2 • 1, 2
Return to Plugin Support (VST/AU) Who is onlineUsers browsing this forum: No registered users and 301 guests |
© 2017 Synapse Audio Software. All Rights Reserved. |