loading 3rd party preset

Post everything related to Synapse VST and Audio Unit plugins here.

Moderators: Christophe, Mark

loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 9:46 am

Hi,I am going through a tutorial in computer music mag.They provide a preset for dune cm to load but i cant load it.
can anyone help?
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby Teksonik » Thu Jan 10, 2019 11:51 am

Is the Preset in .fxp format on the Computer Music Magazine CD ?

If it's an .fxp file click on where it says Patch on the DuneCm interface and navigate to where the .fxp file is located then load the Preset.

Or are you saying the Preset won't load after taking the above steps ?
User avatar
Teksonik
Godlike
 
Posts: 4218
Joined: Fri Jan 30, 2004 3:08 pm
Location: Las Vegas

Re: loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 11:55 am

hi thanks for reply,yes preset dosent load,i do what u suggested and the current preset stays loaded,i tried moving to bank b which is init preset and same result
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby Teksonik » Thu Jan 10, 2019 12:27 pm

Is the preset for the exact same version of Dune CM you have installed ? Are you sure that preset isn't for the full version of Dune and not Dune CM ?
User avatar
Teksonik
Godlike
 
Posts: 4218
Joined: Fri Jan 30, 2004 3:08 pm
Location: Las Vegas

Re: loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 1:20 pm

yes it is dune cm that computer music are using in the tutorial
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 1:27 pm

i clicked on properties in the fxp.
it says type of file cubase effect program file(.fxp)
i am using cubase 9.5 and have tried cubase 10
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby Teksonik » Thu Jan 10, 2019 1:47 pm

Yes that's the proper file format for patches. An .fxb file would be a Bank file.

The only thing I can think of is that the patch is for a different version of Dune or perhaps the patch is corrupted. It shouldn't matter what DAW you are using.

Can you upload the patch here or somewhere else ? I'll check it out when I get back from getting breakfast. :)
User avatar
Teksonik
Godlike
 
Posts: 4218
Joined: Fri Jan 30, 2004 3:08 pm
Location: Las Vegas

Re: loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 1:52 pm

i tried attaching it here but i get message the file extension .fxp is not allowed
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby Christophe » Thu Jan 10, 2019 2:58 pm

funkman wrote:i tried attaching it here but i get message the file extension .fxp is not allowed

zip it or put it on a virtual drive like box dropbox or google drive
Yamaha CS-30, Roland SH-1, Roland MKS70, Focusrite Scarlett 18i6, Yamaha FS1R, Oberheim Matrix 1000, Novation Remote 37SL, Korg Legacy, Alesis M1Active 520, Novation Launchpad Pro, Push2, Intel i7-7700HQ
User avatar
Christophe
Moderator
Moderator
 
Posts: 2785
Joined: Sat Jan 17, 2004 8:20 pm
Location: Saint Germain en Laye, France

Re: loading 3rd party preset

Postby Teksonik » Thu Jan 10, 2019 3:40 pm

I've always wondered why Forums will allow a zip file which could contain malware to be uploaded but not a simple .fxp file. Especially on a Forum dedicated to synths that use the .fxp format....... :?

I suppose someone could place a malicious payload in an .fxp file but I'm not aware that it's ever been done.

Anyway I can't think of why the patch won't load unless it's a Version issue or a corrupt file. Anyone else have an idea ?
Last edited by Teksonik on Thu Jan 10, 2019 3:44 pm, edited 1 time in total.
User avatar
Teksonik
Godlike
 
Posts: 4218
Joined: Fri Jan 30, 2004 3:08 pm
Location: Las Vegas

Re: loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 3:42 pm

i think i have attached now
You do not have the required permissions to view the files attached to this post.
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby Teksonik » Thu Jan 10, 2019 3:48 pm

I don't have DuneCM installed and I'd have to look for one of my Computer Music Disks.

Anyone else have DuneCM installed ?
Last edited by Teksonik on Thu Jan 10, 2019 4:08 pm, edited 1 time in total.
User avatar
Teksonik
Godlike
 
Posts: 4218
Joined: Fri Jan 30, 2004 3:08 pm
Location: Las Vegas

Re: loading 3rd party preset

Postby funkman » Thu Jan 10, 2019 3:53 pm

ok thanks
funkman
Novice
 
Posts: 8
Joined: Thu Jan 10, 2019 9:42 am

Re: loading 3rd party preset

Postby Teksonik » Thu Jan 10, 2019 4:19 pm

Ok I installed DuneCM on another system and the patch won't load there. It must be a corrupted file. :?
User avatar
Teksonik
Godlike
 
Posts: 4218
Joined: Fri Jan 30, 2004 3:08 pm
Location: Las Vegas


Return to Plugin Support (VST/AU)

Who is online

Users browsing this forum: No registered users and 460 guests

© 2017 Synapse Audio Software. All Rights Reserved.