i was messing around with some new knobs
i noticed we have:
KnobBig
KnobBigBiPolar
KnobMiddle
KnobMiddleBipolar
KnobSmall
KnobSmallBipolar
Now, when i loaded mine in, i noticed a problem with bipolar ones
EG fine tune should be bipolar, as it goes from -100 to 100, but it actually uses the "Osc3Fine = 265, 115, Small" not "SmallBipolar"
Same with Osc Semi, Osc Pan in mixer section, FM Fine and Filter Drive
Resonance uses Bipolar when it should be standard
there may be more, i havent looked at it all yet
This could be a minor problem to anyone building skins for it
Skin Knob ProblemModerators: Christophe, Mark
10 posts
• Page 1 of 1
Skin Knob ProblemWindows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: Skin Knob Problemnew problem
the filter fx route window looks a bit funky in my skin. I havent changed that part, or edited coordinates, but the window is showing an offset image now...any ideas? You do not have the required permissions to view the files attached to this post. Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: Skin Knob ProblemI had the same problem with the edited skin I'm using. There is a new 6 slot Filter Effects Routing:
I just copied the routing.pngs from the default and dropped them into the folder of my skin edit (or I might have just made a copy of the latest default and then dropped my edited color files into it, don't remember which). That fixed it here. You do not have the required permissions to view the files attached to this post.
Re: Skin Knob Problemthanks, I'll try that
strange tho, as i didnt change that image or its position. Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: Skin Knob Problemhang on, are you saying the image has changed? i DL lateset update, but im using a copy of the older default for my skin edit...
not at pc, will check later Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: Skin Knob ProblemIn my case my color edit was from an earlier version of D3 so the Routing.pngs were the old ones with four options instead of six.
I just tried it with a couple of color edits that I hadn't fixed yet and all I had to do was copy the "FilterEffectRouteDisplay.png" and "FilterEffectRoutePopup.png" from the latest Default (I use the Large variation) and paste them into my older color edit folder. That fixed the issue here. I have not changed the XY position of any elements, I just did some recoloring to have a blue version instead of the default red one.
Re: Skin Knob Problemok, cool, I'll try that later.
Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: Skin Knob Problemworked perfectly, thanks
Windows 11 Home - 12th Gen Intel(R) Core(TM) i5-12400 2.50 GHz -32GB RAM
250GB SSD - 1TB HDD | M-Audio Oxygen 25 V
Re: Skin Knob ProblemMy pleasure.
10 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: No registered users and 468 guests |
© 2017 Synapse Audio Software. All Rights Reserved. |