Have you had any other reports of a volume bug with master bus 1 in use in the latest release?
I will work on a song.. sounds good.. volume in check.. save.
later come back.. and the volume on the bus1 is extremely loud.. and the slider doesnt seem to affect it much, if any.. moving audio to bus2 seems to show that bus2 is at least working. hmm.
volume bug on BUS1 ?Moderators: Christophe, Mark
6 posts
• Page 1 of 1
volume bug on BUS1 ?I noticed there's a issue with strip 9 showing Master Events - though it doesn't effect it, but renders it useless if one wants to automate 9 as well. Haven't noticed errors on Bus 1 per say, but maybe it's picking up events from strip 13 or something?
Have a look in Event Editor and see if it looks familiar to automation you may have done for another track or Bus.
volume bug on BUS1 ?yeah its weird.. sometimes it flakes out othertimes its working fine..
when it does flake out.. the bus one volume slider does very, very little to alter the volume - its at max top or bottom on the slider range. I have yet to see the other bus slots do this.. but maybe its just down to me not using them much.. *shrug* I will continue to play with it over time and see if i can find a cause.. in the meantime i wanted to make the above post to at least note one person is having this issue.
volume bug on BUS1 ?I know when I came across the Channel 9 issue, it was WTF - as I was going to draw in moves, but they were already there? The only other thing I automated was the Master fader, and sure enough - identical events. So it was pure luck I caught that one when I did.
So I wouldn't be too surpised your Bus 1 is picking up something off another channel or generator event you've previously done? Definately some wires got crossed in OP that needs priority attention,
volume bug on BUS1 ?Could these issues be something to do with songs created on an earlier version? I've had a similar issue with the new 2-Tap Delay on one particular buss strip but it only happens in one song, so I put it down to being a minor incompatibility issue that is easy to move past.
Dell G7 (Hexa-Core i7)|Cubase Pro 10||Analog Keys|Ultranova|MicroMonsta|Uno|Skulpt|Craft Synth 2.0|
novakill.com
volume bug on BUS1 ?For me, it was working a new song on one of the latest version's of OP (7.61?) Now how long my problem had been existing beforehand, if at all - that I'm not sure? And so far since Master moves have appeared in Ch9 for more than one song of mine. :confused:
Getting to be like a old Otari deck with post it notes all over it... 'Don't automate Ch9', 'Be wary of Bus1', 'Do Not put 2tap on Ins4' and so on.
6 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: Mark and 162 guests |
© 2017 Synapse Audio Software. All Rights Reserved. |